The Evotech Hoist has unique features, which allows the user to easily programme a loading cycle. The user can pre-set a loading position for your wheelchair or scooter, then the hoist will load each into your car accurately, as programmed.
When the hoist is not in use the handset clips nicely onto the bracket on the hoist arm. The hoist will automatically switch off, if no button has been pressed in the last 25 seconds.
The Evotech Programmable Hoist is one of several solutions SDL offer and we can provide you with the expert advice and help you need to make the right choice for you.
Programmable 4way Evotech Hoist
To programme the loading position is straighforward. You need to first load your wheelchair or scooter in the correct place in your vehicle, by using the buttons on the handset. Once the loading position has been recorded into the control box of the hoist, then, each time you are loading the wheelchair or scooter, the hoist’s arm will stop at the perfect position as programmed, and the loading position can always be reset as many times as you require.
Once the loading cycle is finished, you can remove the spreader bar and re-press the IN button on the handset, this will drive the hoist arm in even further to achieve a clearer view in the vehicle’s rear-view mirror.
When the hoist is not in use the handset clips nicely onto the bracket on the hoist arm. The hoist will automatically switch off, if no button has been pressed in the last 25 seconds.
